Table of Contents
Advertisement
Diagnostics
Format:
test_capture
capture_ping
> analyzer save name
The file is stored in the /etc/config/analyzer directory. To transfer the file to your PC, see
captured data to your
Download captured data to your PC
After saving captured data to a file (see
from the WebUI or from the command line by using the
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the analyzer directory and click d to open the directory.
4. Select the saved analyzer report you want to download and click
Command line
1. Log into the Connect IT Mini command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Type scp to use the Secure Copy program to copy the file to your PC:
> scp host hostname-or-ip user username remote remote-path local local-path to remote
where:
Digi Connect IT® Mini User Guide
PC.
Save captured data traffic to a
Analyze network traffic
file), you can download the file
scp
(secure copy file) command.
(download).
Download
572
Advertisement
Table of Contents
