Table of Contents
Advertisement
User authentication
d. Generate a Secret key:
i. Click ... next to the field label and select Generate secret key.
ii. To display the QR code for the secret key, click ... next to the field label and select
Show secret key QR code.
iii. Copy the secret key, or scan or copy the QR code, for use with an application or mobile
device to generate passcodes.
Note
image functionality.
e. For time-based verification only, select Disallow code reuse to prevent a code from being
used more than once during the time that it is valid.
f. For time-based verification only, in Code refresh interval, type the amount of time that a
code will remain valid.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}. For example, to set Code refresh interval to ten minutes,
enter 10m or 600s.
g. In Valid code window size, type the allowed number of concurrently valid codes. In cases
where TOTP is being used, increasing the Valid code window size may be necessary
when the clocks used by the server and client are not synchronized.
h. For Login limit, type the number of times that the user is allowed to attempt to log in
during the Login limit period. Set Login limit to 0 to allow an unlimited number of login
attempts during the Login limit period.
i. For Login limit period, type the amount of time that the user is allowed to attempt to log
in.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}. For example, to set Login limit period to ten minutes, enter
10m or 600s.
j. Scratch codes are emergency codes that may be used once, at any time. To add a scratch
code:
i. Click Scratch codes.
ii. For Add Code, click g .
iii. For Code, enter the scratch code. The code must be eight digits, with a minimum of
10000000.
iv. Click gagain to add additional scratch codes.
10. Click Apply to save the configuration and apply the change.
Digi Connect IT® Mini User Guide
To copy the QR code, right-click the QR code and select your browser's save
Local users
405
Advertisement
Table of Contents
