Digi Connect IT Mini User Manual page 256

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Virtual Private Networks (VPN)

Task two: Create an IPsec endpoint interface

1. Click Network > Interface.

2. For Add Interface, type ipsec_endpoint1 and click g .

3. For Zone, select Internal.

4. For Device, select Ethernet: loopback.

5. Click to expand IPv4.

6. For Address, type the IP address of the local GRE tunnel, 172.30.0.1/32.

7. Click Apply to save the configuration and apply the change.

Digi Connect IT® Mini User Guide

Generic Routing Encapsulation (GRE)