Digi Connect IT Mini User Manual page 509

System administration
where value uses the syntax number{b|bytes|KB|k|MB|MB|M|GB|G|TB|T}.
g. To run the script only once at the specified time:
(config system schedule script 0)> once true
(config system schedule script 0)>
If once is enabled, rebooting the device will cause the script to run again. The only way to
re-run the script is to:
n
n
n
h. Sandbox is enabled by default. This option protects the script from accidentally destroying
the system it is running on.
(config system schedule script 0)> sandbox true
(config system schedule script 0)>
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect IT® Mini User Guide
Remove the script from the device and add it again.
Make a change to the script.
Disable once.
Schedule system maintenance tasks
509