Digi Connect IT Mini User Manual page 43

Interfaces
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Set the metrics for Modem:
a. Click Network > Interfaces > Modem > IPv4.
b. For Metric, type 1.
c. Click IPv6.
d. For Metric, type 1.
4. Set the metrics for ETH:
a. Click Network > Interfaces > ETH > IPv4.
b. For Metric, type 2.
c. Click IPv6.
d. For Metric, type 2.
5. Click Apply to save the configuration and apply the change.
The Connect IT Mini device is now configured to use the cellular modem WWAN, Modem, as its highest
priority WAN, and its Ethernet WAN, ETH, as its secondary WAN.
Command line
Digi Connect IT® Mini User Guide
Wide Area Networks (WANs)
43