Digi Connect IT Mini User Manual page 86

Interfaces
e. For Use DNS:
n
n
n
The default setting is When primary default route.
f. SIM failover is enabled by default, which means that the modem will automatically fail
over from the active SIM to the next available SIM when the active SIM fails to connect. If
enabled:
i. For Connection attempts before SIM failover, type the number of times that the
device should attempt to connect to the active SIM before failing over to the next
available SIM.
ii. For SIM failover alternative, configure how SIM failover will function if automatic SIM
switching is unavailable:
9. For APN list and APN list only, the Connect IT Mini device uses a preconfigured list of Access
Point Names (APNs) when attempting to connect to a cellular carrier for the first time. After
the device has successfully connected, it will remember the correct APN. As a result, it is
generally not necessary to configure APNs. See
information and instructions for setting an APN.
10. (Optional) To configure the IP address of a custom gateway or a custom netmask:
a. Click Custom gateway to expand.
b. Click Enable.
c. For Gateway/Netmask, enter the IP address and netmask of the custom gateway. To
override only the gateway netmask, but not the gateway IP address, use all zeros for the
IP address. For example, 0.0.0.0./32 will use the network-provided gateway, but with a
/32 netmask.
11. Optional IPv4 configuration items:
a. Click IPv4 to expand.
b. IPv4 support is Enabled by default. Click to disable.
c. Set the Metric.
See Configure WAN/WWAN priority and default route metrics
metrics.
d. For Weight, type the relative weight for default routes associated with this interface. For
multiple active interfaces with the same metric, Weight is used to load balance traffic to
the interfaces.
Digi Connect IT® Mini User Guide
Always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
When primary default route: Only use the DNS servers provided for this WWAN
when the WWAN is the primary route.
Never: Never use DNS servers for this WWAN.
None: The device will perform no alternative action if automatic SIM switching
n
is unavailable.
Reset modem: The device will reset the modem if automatic SIM switching is
n
unavailable.
Reboot device: The device will reboot if automatic SIM switching is
n
unavailable.
Wide Area Networks (WANs)
Configure cellular modem APNs
for further information about
for further
86