Digi Connect IT Mini User Manual page 367

Applications
<sci_request version="1.0">
<data_service>
<targets>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<device id="00000000-00000000-0000FFFF-485740BC"/>
</targets>
<requests>
<device_request target_name="myTarget">
my payload string
</device_request>
</requests>
</data_service>
</sci_request>
7. For the device_request element, replace the value of target_name with showSystem. This
matches the target parameter of the device_request.register function in the showsystem.py
application.
<device_request target_name="showSystem">
8. Click Send.
You should receive a response similar to the following:
<sci_reply version="1.0">
<data_service>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<requests>
<device_request target_name="showSystem" status="0">Model
Mini
Serial Number
Hostname
MAC
Hardware Version
Firmware Version
Bootloader Version
Firmware Build Date
Schema Version
Timezone
Current Time
CPU
Uptime
Temperature
Contact
Disk
----
Load Average
RAM Usage
Disk /etc/config Usage : 0.068MB/13.416MB(1%)
Disk /opt Usage
Disk /overlay Usage
Disk /tmp Usage
Digi Connect IT® Mini User Guide
: Connect IT Mini-000068
: Connect IT Mini
: 00:40:D0:13:35:36
: 50001959-01 A
: 20.8.22.32
: 1
: Fri, 28 Aug 2020 9:25:12
: 461
: UTC
: Fri, 28 Aug 2020 9:25:12
: 1.1
: 1 day, 21 hours, 49 minutes, 47 seconds (164987s)
: 39C
: Jane Smith
: 0.10, 0.05, 0.00
: 85.176MB/250.484MB(34%)
: 47.724MB/5309.752MB(1%)
: MB/MB(%)
: 0.004MB/40.96MB(0%)
Digidevice module
: Digi Connect IT
367