Configure Dns - Digi Connect IT Mini User Manual

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Repeat this step to list additional firewall zones.

4. (Optional) Configure Multicast DNS (mDNS)

mDNS is a protocol that resolves host names in small networks that do not have a DNS server.

mDNS is disabled by default. To enable:

(config)> service telnet mdns enable true

5. (Optional) Set the port number for this service.

The default setting of 23 normally should not be changed.

(config)> service telnet port 25

6. Save the configuration and apply the change:

(config)> save

Configuration saved.

7. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Configure DNS

The Connect IT Mini device includes a caching DNS server which forwards queries to the DNS servers

that are associated with the network interfaces, and caches the results. This server is used within the

device, and cannot be disabled. Use the access control list to restrict external access to this server.

Digi Connect IT® Mini User Guide

(config)> ... firewall zone ?

Zones: A list of groups of network interfaces that can be referred to by

filtering rules and access control lists.

Additional Configuration

-------------------------------------------------------------------------------

dynamic_routes

Configure DNS