Command line interface
At the config prompt, enter service ssh enable ?:
n
(config)> service ssh enable ?
At the config prompt:
n
a. Enter service to move to the service node:
b. Enter ssh to move to the ssh node:
c. Enter enable ? to display help for the enable parameter:
Either of these methods will display the following information:
(config)> service ssh enable ?
Enable: Enable the service.
Format: true, false, yes, no, 1, 0
Default value: true
Current value: true
(config)> service ssh enable
Move within the configuration schema
You can perform configuration tasks at the CLI by moving within the configuration.
Move forward one node in the configuration by entering the name of an Additional
n
Configuration option:
1. At the config prompt, type service to move to the service node:
(config)> service
(config service)>
2. Type ssh to move to the ssh node:
(config service)> ssh
(config service ssh)>
3. Type acl to move to the acl node:
(config service ssh)> acl
(config service ssh acl)>
Digi Connect IT® Mini User Guide
(config)> service
(config service)>
(config service)> ssh
(config service ssh)>
(config service ssh)> enable ?
(config service ssh)>
Configuration mode
599