Digi Connect IT Mini User Manual page 116

Interfaces
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure DHCP options
You can configure DHCP servers running on your Connect IT device to send certain specified DHCP
options to DHCP clients. You can also set the user class, which enables you to specify which specific
DHCP clients will receive the option. You can also force the command to be sent to the clients.
DHCP options can be set on a per-LAN basis, or can be set for all LANs. A total of 32 DHCP options can
be configured.
Required configuration items
DHCP option number.
n
Value for the DHCP option.
n
Additional configuration items
The data type of the value.
n
Force the option to be sent to the DHCP clients.
n
A label for the custom option.
n
Digi Connect IT® Mini User Guide
Local Area Networks (LANs)
116