Digi Connect IT Mini User Manual page 253

Hide thumbs Also See for Connect IT Mini:

Table of Contents

Virtual Private Networks (VPN)

3. Create a GRE tunnel named gre_tunnel2:

a. Local endpoint set to the IPsec endpoint interface, Interface: ipsec_endpoint2.

b. Remote endpoint set to the IP address of the GRE tunnel on Connect IT Mini-1, 172.30.0.1.

4. Create an interface named gre_interface2 and add it to the GRE tunnel:

a. Zone set to Internal.

b. Device set to IP tunnel: gre_tunnel2.

c. IPv4 Address set to a virtual IP address on the GRE tunnel, 172.31.1.1/30.

Configuration procedures

Configure the Connect IT Mini-1 device

Task one: Create an IPsec tunnel

1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click VPN > IPsec > Tunnels.

4. For Add IPsec Tunnel, type ipsec_gre1 and click g .

5. Click to expand Authentication.

6. For Pre-shared key, type testkey.

7. Click to expand Remote endpoint.

8. For Hostname, type public IP address of the Connect IT Mini-2 device.

9. Click to expand Policies.

Digi Connect IT® Mini User Guide

Generic Routing Encapsulation (GRE)