Table of Contents
Advertisement
File system
Download files
1. Log into the Connect IT Mini WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory to which the file will be uploaded and click d to open the directory.
4. Highlight the appropriate file and click
Upload and download files by using the Secure Copy command
Copy a file from a remote host to the Connect IT Mini device
To copy a file from a remote host to the Connect IT Mini device, use the
> scp host hostname-or-ip user username remote remote-path local local-path to local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied to the
n
Connect IT Mini device.
local-path is the location on the Connect IT Mini device where the copied file will be placed.
n
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the Connect IT Mini device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/Connect IT Mini-20.8.22.32.bin local
/etc/config/ to local
admin@192.168.4.1's password: adminpwd
Connect IT Mini-20.8.22.32.bin
>
Digi Connect IT® Mini User Guide
(download).
100% 36MB 11.1MB/s
Upload and download files
scp
command as follows:
00:03
545
Advertisement
Table of Contents
