Digi Connect IT Mini User Manual page 272

Virtual Private Networks (VPN)
n
The default is defaultroute.
12. Set the GRE tunnel local endpoint:
a. Set the method to determine the GRE tunnel local endpoint:
(config vpn nemo nemo_example)> tun_local type value
(config vpn nemo nemo_example)>
where value is one of:
n
n
The default is defaultroute.
13. Configure one or more local networks to use as a virtual NEMO network interface. Generally,
this will be a Local Area Network (LAN):
a. Add a local network to use as a virtual NEMO network interface:
(config vpn nemo nemo_example)> add network end eth
(config vpn nemo nemo_example)>
Digi Connect IT® Mini User Guide
ii. Set the interface. For example:
(config vpn nemo nemo_example)> coaddress interface eth
(config vpn nemo nemo_example)>
ip
If ip is used, set the IP address:
(config vpn nemo nemo_example)> coaddress address IP_address
(config vpn nemo nemo_example)>
defaultroute: Uses the same network interface as the default route.
interface
If interface is used, set the interface.
i. Use the ? to determine available interfaces:
(config vpn nemo nemo_example)>tun_local interface ?
Interface: The network interface to use to communicate with the peer. Set this field
to blank if using the default route.
Format:
defaultip
defaultlinklocal
lan
loopback
modem
Current value:
(config vpn nemo nemo_example)> tun_local interface
ii. Set the interface. For example:
(config vpn nemo nemo_example)> tun_local interface eth
(config vpn nemo nemo_example)>
NEMO
272