Table of Contents
Advertisement
System administration
Schedule system maintenance tasks
You can configure tasks and custom scripts to be run during a specified maintenance window.
Required configuration items
The time that the system maintenance tasks will start.
n
The duration window during which the system maintenance tasks can run.
n
The frequency (either daily or weekly) that the tasks will run.
n
The tasks to be performed. Options are:
n
Modem firmware update.
l
Configuration check.
l
Additional configuration items
Custom scripts that should be run as part of the configuration check.
n
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > System maintenance.
4. For Start time, type the time of day that the maintenance window should start, using the
syntax HH:MM. If Start time is not set, maintenance tasks are not scheduled and will not be
run.
The behavior of Start time varies depending on the setting of Duration window, which is
configured in the next step.
If Duration window is set to Immediately, all scheduled tasks will begin at the exact
n
time specified in Start time.
If Duration window is set to 24 hours, Start time is effectively obsolete and the
n
maintenance tasks will be scheduled to run at any time. Setting Duration window to 24
hours can potentially overstress the device and should be used with caution.
If Duration window is set to any value other than to Immediately or 24 hours, the
n
maintenance tasks will run at a random time during the time allotted for the duration
window.
If Duration window is set to one or more hours, the minutes field in Start time is
n
ignored and the duration window will begin at the beginning of the specified hour.
Digi Connect IT® Mini User Guide
Schedule system maintenance tasks
503
Advertisement
Table of Contents
