Table of Contents
Advertisement
Virtual Private Networks (VPN)
19. Click to expand Policies.
Policies define the network traffic that will be encapsulated by this tunnel.
a. Click gto create a new policy.
The new policy configuration is displayed.
b. Click to expand Local network.
c. For Type, select one of the following:
n
n
n
n
d. For Remote network, enter the IP address and optional netmask of the remote network.
The keyword any can also be used. .
Digi Connect IT® Mini User Guide
IPv6: The ID will be interpreted as an IPv6 address and sent as an ID_IPV6_
n
ADDR IKE identity.
For IPv6 ID value, type an IPv6 formatted ID. This can be a fully-qualified
domain name or an IPv6 address.
RFC822/Email: The ID will be interpreted as an RFC822 (email address).
n
For RFC822 ID value, type the ID in internet email address format.
FQDN: The ID will be interpreted as FQDN (Fully Qualified Domain Name) and
n
sent as an ID_FQDN IKE identity.
For FQDN ID value, type the ID as an FQDN.
KeyID: The ID will be interpreted as a Key ID and sent as an ID_KEY_ID IKE
n
identity.
For KEYID ID value, type the key ID.
Address: The address of a local network interface.
For Address, select the appropriate interface.
Network: The subnet of a local network interface.
For Address, select the appropriate interface.
Custom network: A user-defined network.
For Custom network, enter the IPv4 address and optional netmask. The keyword
any can also be used.
Request a network: Requests a network from the remote peer.
IPsec
192
Advertisement
Table of Contents
