Digi Connect IT Mini User Manual page 403

User authentication
Two-factor authentication information for user login over SSH, telnet, and the serial console:
n
The verification type for two-factor authentication: Either time-based or counter-based.
l
The security key.
l
Whether to allow passcode reuse (time based verification only).
l
The passcode refresh interval (time based verification only).
l
The valid code window size.
l
The login limit.
l
The login limit period.
l
One-time use eight-digit emergency scratch codes.
l
To configure a local user:
É
WebUI
1. Log into the Connect IT Mini WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User, type a name for the user and click g .
The user configuration window is displayed.
The user is enabled by default. To disable, click to toggle off Enable.
5. Enter a password for the user. The password must be at least ten characters long and must
contain at least one uppercase letter, one lowercase letter, one number, and one special
character.
6. Click to expand Login failure lockout.
The login failure lockout feature is enabled by default. To disable, click to toggle off Enable.
Digi Connect IT® Mini User Guide
Local users
403