Services
/network/interface/lan
/network/interface/loopback
/network/interface/modem
Current value:
(config service multicast test)> interface
b. Set the interface. For example:
(config service multicast test)> interface /network/interface/eth
(config service multicast test)>
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Digi Connect IT® Mini User Guide
Configure a multicast route
336