Table of Contents
Advertisement
Configure the Connect IT Mini
Schedule system maintenance
You can schedule the system to run a set of system maintenance tasks to run within a specified time
window. You can also schedule a custom script to run at the specified time and frequency.
Note
If you are scheduling a custom script, you must have previously created the script.
For example, you can specify a start time of 10:00 and a duration window of 2 hours. In this example,
the system maintenance can take place and custom scripts run at any time between 10:00 and 12:00.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > System
3. Expand the System section.
4. Expand the Scheduled tasks section.
5. Expand the System maintenance section.
6. Enter values into the fields.
Field
Start time
Duration window
Digi Connect IT® Mini User Guide
screen.
Description
The start time of the maintenance window. All enabled
maintenance tasks take place at any random time within
the time block specified in the Duration window field.
If this field is empty, maintenance is not scheduled and no
maintenance tasks will run.
Syntax: HH:MM
If the duration in the Duration window field is set to 1 or
more hours, the minutes field is truncated.
The window of time during which the maintenance tasks
are scheduled to run. The default values is 2 hours.
24 hours: If this option is selected, the start time
n
entered in the Start Time field becomes obsolete, as
a value of 24 hours means the maintenance tasks
are scheduled to run at any time during a 24-hour
time period.
Immediately: If this option is selected, all
n
maintenance processes will execute at the same
time. This could potentially be dangerous, as this
action may stress the system.
Schedule system maintenance
43
Advertisement
Table of Contents
