System Settings - Digi LTS 32 User Manual

Enable and Disable Alarms
Once alarm conditions are configured, enable and disable individual alarms by selecting or
deselecting the Enable checkbox for each alarm.

System settings

The System Configuration page configures system settings, including device description
information, such as the device name, contact, and location, and whether SNMP is enabled or
disabled and the SNMP traps that are enabled.
Device Identity Settings
A device identity is a system description of the ConnectPort LTS product description, contact, and
location. This device identity can be useful for identifying a specific Digi device when working
with a large number of devices in multiple locations.
The Device ID is a numeric identifier for the ConnectPort LTS product. This identifier should be
unique for each Digi device being located on the network.
77