Table of Contents
Advertisement
Configure Connect IT using the web user interface
Update Connect IT firmware
You can update the firmware on the Connect IT. Before you begin, you must download the desired
version of the firmware onto your PC.
1.
Download the Connect IT firmware to your
2.
Log in to the Connect IT web
3. Select the System tab in the left pane.
4. In the Device Firmware section, click Choose File.
5. Browse for and select the firmware file downloaded to your PC.
6. Click Update Firmware.
Download the Connect IT firmware to your PC
1. Go to www.digi.com/support.
2. Scroll down to the Support Downloads section.
3. Click Firmware Updates.
4. In the Filter the list box, enter Connect IT. As you type, matches display.
5. Click Connect IT.
6. From the list of options, select the Connect IT 4 option.
7. From the Firmware Updates section, select the version you want to download. The file is
downloaded to a folder on your computer. Make a note of the folder path and name.
Configure connection to Remote Manager from the web UI
You can configure the settings for connection to Remote Manager in the Connect IT web UI.
1.
Log in to the Connect IT web
2. Click Configuration in the left pane.
3. Expand the Central management section.
a. Select the Enable central management option to enable Connect IT to connect to
b. From the Service list box, select the Digi Remote Manager option.
c. In the Management server field, enter the URL for Remote Manager.
d. In the Retry interval field, enter the interval at which Connect IT should attempt to
e. In the Keep-alive interval field, specify how often to send keep-alive messages
4. Click Save.
5. Disconnect the Ethernet cable from the Connect IT and your PC.
Digi Connect IT® 4 User Guide
UI.
UI.
Remote Manager.
connect to Remote manger, after a disconnect. The time is measured in seconds.
when using a non-cellular interface.
Update Connect IT firmware
PC.
33
Advertisement
Table of Contents
