Table of Contents
Advertisement
Configure the Connect IT 16/48
View power controller status and manage power (Administrators)
You can view the status of each outlet configured for a power controller and turn the power to an
outlet on and off.
Note
This process can only be done in the local web UI. Only admin users can access the Power
Controllers page. Non-administrators can control the power in a Terminal screen. See
outlet power from a terminal (all
1.
Log in to the Connect IT local web user
2. Click Status in the left pane.
3. Expand the Power section. The Power Controllers page appears.
4. You can do the following:
View power controller status
Each outlet and power controller combination configured for remote power management
appears in the page. The state of the power for each outlet is displayed:
on: The outlet has power.
n
off: The outlet does not have power.
n
unknown: The Connect IT 16/48 cannot get a status from the power controller.
n
Change the power state
You can change the power state for an outlet.
a. From the Change State list box, select an option from the list box.
b. Click Apply.
View power manager log
A log of all remote power management events appears in the Power Manager Log. Click
Download to download a copy of the log.
Control the outlet power from a terminal (all users)
A user can log into a terminal on the Connect IT and then power the device connected to an outlet on
and off.
1.
Log in
to manage the Connect IT.
2.
Access the Terminal
3. When prompted, enter your user name and password.
Digi Connect IT® 16/48 User Guide
users).
interface.
On: Turn on the power to that outlet.
n
Off: Turn off the power to that outlet.
n
Cycle: Turn the power off, then on. If the power state for the outlet is
n
currently off, then the power is just turned on.
screen.
Configure Remote Power Management
Control the
24
Advertisement
Table of Contents
