Installing The Cs 1000 Linux Base; Installing Linux Applications; Joining The Ucm Security Domain - Avaya 1000M Upgrade

Page 196 of 212

Installing the CS 1000 Linux Base

Installing Linux applications

Joining the UCM security domain

NN43021-461 Standard 06.03
lnstalling a Signaling Server
You must install CS 1000 Linux Base if your Signaling Server is not running
the latest CS 1000 Linux Base software release. The CP PM Linux upgrade
kit contains a hard drive with CS 1000 Linux Base preloaded. You can install
CS 1000 Linux Base from the command line interface (CLI) using a bootable
CF card on CP PM, and using a bootable optical disk on COTS.
Configure the ELAN, TLAN, IP address, Gateway, subnet masks, date, and
time settings during the CS 1000 Linux Base installation.
For information about installing or upgrading CS 1000 Linux Base, see Linux
Platform Base and Applications Installation and Commissioning
(NN43001-315).
Avaya CS 1000 Release 7.5 Signaling Server and SIP line software are Linux
applications. Linux applications install on CS 1000 Linux Base and interact
with the CS 1000 Linux Base application framework. You can deploy and
install Linux applications with the CS 1000 Linux Base Centralized
Deployment Manager. You can configure and deploy SIP Line with Element
Manager (EM).
For information about Linux applications and Centralized Deployment
Manager, see Signaling Server IP Line Applications Fundamentals
(NN3001-125) and Linux Platform Base and Applications Installation and
Commissioning (NN43001-315).
For information about Element Manager, see Element Manager: System
Administration (NN43001-632).
The UCM Primary Security Server acts as the RADIUS server that CS 1000
devices use to obtain authentication and access control parameters for CLI
access. The UCM Primary Security Server sends RADIUS related parameters
to CS 1000 devices using the SSH protocol.
June 2014