Installing The Fixing Assembly - Canon NP6251 Service Manual

CHAPTER 9 INSTALLATION
C. Installing the Fixing Assembly
Step
1 Open the front door.
2 Shift the fixing assembly releasing
lever in the direction of the arrow
(counterclockwise) to release the
transfer/separation
assembly. Then, slide out the fixing
feeding unit to the front.
3 Remove the tag and the separation
releasing
fixing/feeding assembly.
Caution:
Be sure to remove any foreign
matter (glue from tape) from
the feeding belt.
4 Remove the tag retaining tape, and
open the fixing/delivery assembly.
9-8
COPYRIGHT © 1997 CANON INC.
Work
charging
block from the
Fixing/feeding
assembly
Releasing
lever
Separation claw releasing block
Fixing/delivery assembly
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Tag
Tags