Hcs Top Tray; Unloading The Hcs Stacker Tray / Cart - Xerox Versant 80 Press User Manual

3. Sample Print button: Press this button to have the HCS deliver a sample print of
the job to the Top Tray. A single-page sample is provided to the output area.
4. Unload button: Press once to lower the Stacker Tray and unlock the HCS front door.
5. Unload indicator: This indicator lights when the Stacker Tray has reached the down
position and the front door can be opened.
6. Identifying the Main HCS Components: This indicator blinks when there is a jam
in the exit area (E8).
7. Stacker Transport jam area: These indicators blink when there is a jam in Areas
E4, E5, and/or E6.
8. Stacker Entrance jam area: These indicators blink when there is a jam in Areas E1,
E2, and/or E3.

HCS Top Tray

The Top Tray offers the following:
• Convenience for short stack runs (up to 500 sheets) without offsetting.
• Delivery of purged sheets.

Unloading the HCS Stacker Tray / Cart

The HCS has Unload While Run capability.
1. Press the Unload button on the HCS control panel.
2. After the Unload Indicator lights, open the HCS front door.
3. Position the securing bar on top of the stacked paper.
4. Pull the Stacker Tray / Cart straight out of the HCS.
5. Remove the securing bar.
6. Remove the paper from the Stacker Tray / Cart.
7. Push the empty Stacker Tray / Cart straight into the HCS.
8. Position the securing bar on the fixed area inside the HCS.
9. Close the front door; the tray will rise to the operate position.
® ®
Xerox Versant 80 Press
User Guide
High Capacity Stacker (HCS)
23-3