Registration Roller - Xerox 6110MFP/XN Service Documentation

Disassembly and Reassembly

5.19 Registration Roller

1. Remove the following:
- HVPS 5.4.4
- Laser Scan Unit 5.4.3
- Main PBA 5.4.5.5
- Drive Unit 5.4.7
2. First remove the Plan Washer securing the Regi
Clutch and then pull the Regi Clutch, as shown below.
3. Remove the E-ring below the both side of the Regi
Roller, as shown below.
E-ring
Regi Roller
4. Take off the Sheet and then remove the Regi Pulley,
as shown below.
Regi Pulley
Clutch
5. To remove the Regi Roller, first slide the left side to
right side and then take out the left side, as shown
below.
Plain Washer
E-ring
Regi Roller
Notice : Do not grab the rubber part of the Regi Roller, it
Sheet
Regi Roller
2
Bush
Paper Guide
1
may cause a malfunction due to a foreigen
object.