Hcs Trays; Top Tray; Sample Print Feature - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

HCS Trays

Top Tray

The Top Tray offers the following:
• Copies/prints are aligned easily without folds or winkles in the output.
• To enable easier pick-up of the ouput copies/prints, the HCS can be stopped by selecting the Stop button on
the machine's UI.

Sample Print feature

Sample prints can be printed by performing the following steps:
1.From the [Copy Output] feature, select:
• Collated or Uncollated
• Output Destination/Offset Stacker
2.Select [Stacker - Stacker Cart] then [Real Time Sample Job].
3.Select [Sample Job On].The [Sample Job On] feature delivers specific pages or sets of an output job to the High
Capacity Stacker's Top Tray.The Sample Job allows the user to check the output while continuing to deliver the major
portion of the job to the Stacker Cart.
• For Collated output, for example, if the output is 100 sets of a 50-page original document, the user can choose
1-3 output sample sets.
• For Uncollated output, for example, if the output is 100 copies of each page of a 50-page original document,
the user can choose 1-3 sample pages4.Enter the desired Sample pages/sets to print for the [First Sample] and
then for the [Second Sample] and [ThirdSample] (if applicable).5.Select [Save].
User Guide
Downloaded From ManualsPrinter.com Manuals
Addendum
10-9