Introduction; Orthopantomograph Op 3D; Intended Use; Abbreviations - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

2 Introduction

2.1 ORTHOPANTOMOGRAPH
The ORTHOPANTOMOGRAPH
producing high quality digital images of dentition, TM-joints and skull. To take images,
you need a suitable workstation connected to the device and a dental imaging software
to capture and manage the images.
The ORTHOPANTOMOGRAPH
Panoramic Imaging
• Standard Panoramic
• Segmented Panoramic
• Pediatric Panoramic
• Bitewing
• TMJ, lateral projection
3D CBCT Imaging
Volume Height x Diameter (H x D)
• 5 x 5 cm; implant and other single tooth imaging
• 6 x 9 cm; single jaw imaging
• 9 x 11 cm; whole dental area imaging (both jaws)
• 9 x 14 cm (optional); both jaws including TMJ
• FOV position and height fine-tuning is possible according to scout images
CAUTION! USA only: Federal law restricts this device to sale by or on the order
of a dentist or other qualified professional.

2.2 Intended use

ORTHOPANTOMOGRAPH
and 3D images of the cranio-maxillofacial complex for use in diagnostic support.
ORTHOPANTOMOGRAPH
qualified professionals.

2.3 Abbreviations

PCBA
THA
GUI
EMI
ESD
DUT
ORTHOPANTOMOGRAPH
™
OP 3D (later called device) is a dental X-ray device
™
OP 3D can be used for the following procedures:
™ OP 3D is an X-ray device that is configured to take panoramic
™ OP 3D must only be used and operated by dentist and other
Printed Circuit Board Assembly
Tube Head Assembly
Graphical User Interface
Electromagnetic Interference
Electrostatic Discharge
Device Under Test
™
OP 3D
™
OP 3D
2 Introduction
7