Configuring The Dhcp Relay Agent; Establishing The Configuration Task - Huawei S9300 Configuration Manual

Terabit routing switch
Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Dhcp Request:
Dhcp Decline:
Dhcp Release:
Dhcp Inform:
Server Reply:
Dhcp Offer:
Dhcp Ack:
Dhcp Nak:
Bad Messages:
Run the display ip pool interface ip-pool-name command to view interface address pool on
VLANIF 10. The similar information is displayed.
<Quidway> display ip pool interface vlanif10
Pool-name
Pool-No
Lease
Domain-name
DNS-server0
NBNS-server0
Netbios-type
Position
Gateway-0
Mask
VPN instance
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------

3.5 Configuring the DHCP Relay Agent

By using a DHCP relay agent, the DHCP clients on a local area network (LAN) can communicate
with the DHCP servers on other network segments, and obtain IP addresses from them. The
DHCP clients on different network segments can also use one DHCP server. This reduces costs
and achieves centralized device management.

3.5.1 Establishing the Configuration Task

Before configuring the DHCP relay agent, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This helps you complete the
configuration task quickly and accurately.
Applicable Environment
If no DHCP server is configured on the local network, the DHCP relay function can be enabled
on an S9300&S9300E to forward DHCP Request packets to the DHCP servers on other
networks. To ensure that the DHCP clients obtain IP addresses, the DHCP server must use a
global address pool, and no address pool can be configured on the interface connected to the
DHCP relay agent.
Issue 01 (2012-03-15)
: vlanif10
: 2
: 1 Days 0 Hours 0 Minutes
: -
: -
: -
: -
: Interface
: 192.168.10.2
: 255.255.255.0
: --
Start
192.168.10.1
192.168.10.254
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
0
1
0
4
1
3
0
0
Status
End
Total
Used
253
0
3 DHCP Configuration
: Unlocked
Idle(Expired)
Conflict
253
0
Disable
0
0
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents