Undo Snmp-Agent - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
Description
Using snmp-agent usm-user command, you can add a new user to an SNMP group.
Using undo snmp-agent usm-user command, you can cancel a user from SNMP
group.
SNMP engineID (for authentication) is required when configuring remote user for an
agent. This command will not be effective without engineID configured.
For V1 and V2C, this command will add a new community name. For V3, it will add a
new user for an SNMP group.
Example
# Add a user wang for huawei (an SNMP group), configures to authenticate with MD5
and sets authentication password as pass.
[Quidway] snmp-agent usm-user v3 wang huawei authentication-mode md5 pass

5.1.22 undo snmp-agent

Syntax
undo snmp-agent
View
System view
Parameter
none
Description
Using undo snmp-agent command, you can disable all versions of SNMP running on
the server.
Perform any command of snmp-agent will enable SNMP Agent.
Example
# Disable the running SNMP agents of all SNMP versions.
[Quidway] undo snmp-agent
Chapter 5 SNMP Configuration Commands
5-20