9
Installing and Routing External Clock Cables
a
Clock Ports
A
A
b
Overhead Cabling
Route the clock cables into the cabinet through the
cable holes on the top of the cabinet.
Route the clock cables through the cable distribution
plate and connect them to the clock ports on the AUX
board.
A
A
1
2
3
4
5
6
1
2
3
75-ohm clock output 1
75-ohm clock output 2
75-ohm clock input 1
75-ohm clock input 2
120-ohm clock input/output 1
120-ohm clock input/output 2
NOTE
Select appropriate clock cables according to the
type of the clock port on the opposite equipment.
Route the clock cables downwards along the side
panel of the cabinet to the cable distribution plate.
Trim the clock cables and bind them onto the binding
plate.
58
AUX board