Dab-Fm Link; Operation Of Speed-Dependent Volume Increase - Seat Mii Electric Owner's Manual

Menu option: submenus with repercussion
Show clock in standby mode
device is turned off, the current time is shown on
the display.
: Here you can select marking colours for
Colour
the screen.
: Here you can manually set the desired
Language
language for the user interface. Alternatively, you
can let the instrument panel language be automati-
cally selected.
:
Bluetooth
: Press to deactivate Bluetooth
Bluetooth
existing connections are disconnected.
®
: Turn Bluetooth visibility on and
Visibility
off.
: Bluetooth ® visibility is activated.
Visible
: Bluetooth ® visibility is deacti-
Not visible
vated. Bluetooth ® visibility must be active for
pairing a Bluetooth ® device with the infotain-
ment system.
: Display or change the name of the
Forename
device. This name will be shown to other Blue-
® ®
tooth devices in your Bluetooth settings.
: Viewing paired devices. Dis-
Paired devices
connection and connection of Bluetooth
®
and individual Bluetooth profiles.
: Search for visible
Searching for a device
®
Bluetooth devices that are within range of the in-
fotainment system. The maximum range is ap-
prox. 10 meters.
Introduction
Menu option: submenus with repercussion
: When the
BT Audio (A2DP/AVRCP)
dio source is to be connected to the infotainment
system via Bluetooth
›››
tive page 128.
Application connection
Data transfer active
Registry
Remove source safely
can safely remove an inserted SD card or a connec-
ted USB device.
®
. All
Factory settings
settings of Radio , Media , Sound and System
separately or together.
System information
of the device.
: Data of the software used.
Copyright
a) Valid only for the FM frequency band.
b) This function depends on the country and unit in
question.
Operation of speed-dependent volume in-
crease
The speed-dependent volume increase func-
®
devices
tion automatically adjusts the volume based
on the speed of the vehicle.
The volume increase can be adjusted in lev-
els from 1 to 7 .
If the selected level is low, the volume only in-
creases slightly when the speed increases, if
on the contrary it is high, the volume increa-
: If an external au-
ses considerably. On 0 the speed-dependent
® , this function must be ac-
volume increase is disconnected.

DAB-FM LINK

If the DAB station being listened to can no
longer be tuned in (e.g., there is no DAB cov-
erage), the device will try to find and tune the
same station on the FM frequency band.
: With this option you
To allow automatic station tracking on all fre-
quencies, the DAB station and the FM station
need to broadcast the station identification,
: You can restore the factory
or to signal through DAB which FM station
corresponds to the same DAB station.
: Status of technical data When the corresponding FM station has been
found, (FM) is displayed behind the name of
the station. If the corresponding DAB station
becomes available again, it returns to DAB
mode after a while.
If the signal is too weak and the DAB station in
question cannot be found again in the FM
band, the radio sound is muted.
operation
119