Advertisement
Shut Down
Button
07-19-01-518 – January 2009
A
C
LYX
OMPONENT
Turning the Instrument OFF
These instructions assume the operator wishes to turn the
instrument OFF at the end of the day or whenever shutting
down the instrument. To turn the instrument OFF during a
procedure, refer to the instructions found in the section for
"Understanding the STOP Button" that appears later in this
chapter.
Note: Unless the touch screen indicates otherwise, the
operator must use the STOP button to turn the instrument
OFF. Failure to do so may result in the inability to restart the
instrument and the need for service.
1.
Touch the STOP button located next to the touch screen.
A screen similar to the following figure will appear.
Typical Stop Screen Overlay
2.
Touch the shut down button. An overlay similar to the
following figure will appear.
Typical Confirmation of Shut Down Overlay
C
S
O
OLLECTION
YSTEM
C
3 – O
HAPTER
PERATING CONSIDERATIONS
'
M
PERATOR
S
ANUAL
3-19
Advertisement
