Advertisement
Preparing for
the Procedure
07-19-01-518 – January 2009
A
C
LYX
OMPONENT
C
HAPTER
Chapter 4C – A
Collection Procedure
The operator should ensure the instructions provided in
Chapter 3 under "Starting the Instrument" and "Performing
Daily Setup" have been completed before attempting to start a
procedure.
WARNING: Complete instructions for use should be
followed for every collection procedure. The A
Component Collection System should be operated by a
qualified individual who has been trained in the use of the
instrument.
WARNING: Risks associated with procedures involving
extracorporeal circulation are blood loss, hemolysis, air
embolism, and/or blood clotting. To minimize these risks,
do not deviate from the procedures described in this
manual.
Before beginning a procedure, ensure that the needed materials
are available, including:
• One A
2RBC-NLR kit
LYX
• Supplies for venipuncture site preparation, blood sampling,
and donor care
• Tube sealer or an equivalent sealing device
WARNING: Disposable kits and sterile solutions are for
single-use only.
CAUTION: Do not operate the instrument if the operating
display is blank or unreadable or if the instrument does not
respond to the touch screen. If the display becomes blank during
a procedure, press the STOP button to isolate the donor from
the instrument.
CAUTION: The touch screen is the main input device for the
instrument. Do not touch the screen during operation except to
interact with the instrument.
C
S
OLLECTION
YSTEM
4C – A
2RBC-NLR C
LYX
2RBC-NLR
LYX
O
'
M
PERATOR
S
ANUAL
P
OLLECTION
ROCEDURE
LYX
4C-3
Advertisement
