Advertisement
A
C
C
LYX
OMPONENT
C
3 – O
HAPTER
PERATING CONSIDERATIONS
Check Button
Procedure
View Button
3-44
S
O
OLLECTION
YSTEM
68. Unload the kit by following the appropriate procedure
directions in Chapter 4, "Removing the Kit."
69. Touch the check button to confirm the kit has been removed
from the instrument.
Refer to the appropriate procedure in Chapter 4, "Recording
Procedure Information" to verify that the relevant information
is provided on the Procedure Information Screen.
The procedure view button will provide a series of summary tabs
that will provide additional information regarding the donor,
procedure results, kit and accessory items that may have been
used, and any alarms that occurred during the procedure. Refer
to the Procedure Summary Tabs section found later in this
chapter for more information.
The operational checks are complete if these instructions have
been completed successfully.
Proceed to turn the instrument OFF. Refer to the instructions
under "Turning the Instrument OFF," provided in this chapter.
CAUTION: Do not start a second procedure while on back-
up battery supply.
Note: Turn the instrument OFF to exit out of test mode.
'
M
PERATOR
S
ANUAL
Typical A
2RBC-LR Procedure
LYX
Information Screen (Test Mode)
07-19-01-518 – January 2009
Advertisement
