Advertisement
Performing
Post-Collection
Processing
Burp Product
Prompt
07-19-01-518 – January 2009
A
C
LYX
OMPONENT
C
HAPTER
The Plasma Product Configuration overlay will be displayed on
the touch screen.
Typical Select Plasma Product Configuration Overlay
Touch the appropriate button to select the desired configuration.
Note: If an error was made in selecting the desired plasma
product configuration, continue with the instructions provided
for the selected configuration until the entire procedure is
completed. Remove all product(s), the kit, and record the
procedure information. The plasma product(s) may then be
either split or placed into a jumbo container following the
center's applicable standard operating procedures.
Burping the Red Cell Product
After the plasma product selection is made, the touch screen will
display the burp product prompt. The procedure described below, to
burp the red cell product, is used with all configurations of
desired plasma product.
Typical Procedure Information Screen with Burp Product
Prompt (Jumbo Product Information Screen displayed)
C
S
OLLECTION
4B – A
RBC/P
LYX
LASMA
O
'
M
YSTEM
PERATOR
S
C
P
OLLECTION
ROCEDURE
ANUAL
4B-41
Advertisement
