Advertisement
A
C
C
LYX
OMPONENT
C
3 – O
HAPTER
PERATING CONSIDERATIONS
Resume Button
Shut Down
Button
Check Button
Unload Kit
Prompt
New Procedure
Button
3-70
S
O
OLLECTION
YSTEM
Pressing the STOP Button Before a Procedure is
Started
If the STOP button is pressed
is entered, the instrument will display a screen offering the
choice to resume the current activity, or shut down the
instrument. Refer to the instructions for "Turning the
Instrument OFF" found earlier in this chapter.
If the STOP button is pressed
information is entered, the instrument will display a screen
overlay with choices to either resume the procedure (return to
the previous screen) by touching the resume button, or end the
procedure by touching the end button. If the end button is
touched, the procedure data screen will be displayed with the
unload kit prompt. If a kit has been installed, it should be
removed from the instrument before the check button is touched.
The operator may then touch the new procedure button to return
to the main data entry screen.
'
M
PERATOR
S
ANUAL
before
after
Typical Ending a Procedure
any operator information
any operator, kit, or donor
07-19-01-518 – January 2009
Advertisement
