Fenwal 4R5707 Operator's Manual page 186

A C C
LYX OMPONENT OLLECTION
C 4A – A 2RBC-LR C
HAPTER LYX
4A-16
S O
YSTEM PERATOR
P
OLLECTION ROCEDURE
Note: If the instrument is positioned on a cart in such a manner
that the red cell storage containers cannot hang freely from the
hanger, it may be hung from a hook attached to the front or side of
the cart. Hang both containers from the same hook.
Installing the Separation Chamber
Depending on the centrifuge carrier on your A
of two configurations will be available. The following instructions
for Steps 11 through 14 should be used if the carrier on your
instrument has a latch with a tab that must be opened to insert the
separation chamber and closed to lock it in the correct position.
This configuration is shown below.
11. Rotate the centrifuge carrier so that the two umbilicus guides
are on the left, and the latch is facing up. Open the latch by
pressing on the tab and pulling up on the latch.
Umbilicus
Guides
Centrifuge Assembly with Latch Closed
' M
S ANUAL
Latch in Open Position
07-19-01-518 – January 2009
instrument, one
LYX
Tab
Latch
Latch
Carrier
Groove