Advertisement
Hang Product
Prompt
Check Button
07-19-01-518 – January 2009
A
C
LYX
OMPONENT
C
HAPTER
Hanging the Product to Weigh
After the operator verifies that the kit is sealed, the touch screen
will display the hang product prompt.
Typical Procedure Information Screen with
Hang Product Prompt
To weigh the products, perform the following steps:
1.
Remove the red cell and in-process containers from their
hanging scales.
2.
Place the red cell storage container on the in-process scale.
Note: The plasma container(s) may remain on the plasma scale
at this time.
3.
Allow the product volume reading to settle. Touch the check
button to confirm that the red cell product has been hung.
C
S
OLLECTION
4B – A
RBC/P
LYX
LASMA
O
'
M
YSTEM
PERATOR
S
C
P
OLLECTION
ROCEDURE
ANUAL
4B-45
Advertisement
