Advertisement
Check Button
Plasma Volume
Button
Check Button
07-19-01-518 – January 2009
A
C
LYX
OMPONENT
C
HAPTER
Note: The Hct/Hgb parameter can be defined to use either
hematocrit or hemoglobin. Hematocrit is used as the
measurement for this manual; however, hemoglobin may also be
used.
13. Touch the check button after the donor's hematocrit has been
entered correctly.
After all donor information has been entered, the red cell volume
and plasma volume buttons will display the default procedure volume
as specified by the procedure nomogram (located in the
Appendix) or center requirements.
14. To adjust plasma volume, touch the plasma volume button and
select the desired plasma collection volume. Touch the check
button and verify the correct volume is displayed.
Typical Select Plasma Volume Overlay
15. Touch the check button to return to the Main Data Entry
Screen once the collection volume has been verified on the
screen overlay.
WARNING: Base the volume of the product(s) to be
collected on the maximum allowable target collection
volume(s) and on sound medical judgement, conforming to
applicable regulations and guidelines set by the appropriate
health regulating agencies.
Note: The instrument will not allow entry of donor or product
inputs inconsistent with configured settings of the instrument's
Administrative Settings. An audible tone and flashing data
button indicates entry of unacceptable data input.
C
S
OLLECTION
4B – A
RBC/P
LYX
LASMA
O
'
M
YSTEM
PERATOR
S
C
P
OLLECTION
ROCEDURE
ANUAL
4B-29
Advertisement
