Advertisement
Return Fluid
Button
Do Not Return
Fluid Button
Cancel Button
07-19-01-518 – January 2009
A
C
LYX
OMPONENT
Pressing the STOP Button After a Procedure has
Started
When the STOP button is pressed during a procedure, a screen
similar to the following figure is displayed:
Typical End Procedure Overlay
The buttons on the End Procedure Screen overlay represent
three possible actions:
1.
End procedure with fluid return. Ending the procedure by
touching the return fluid button allows saline, plasma,
in-process whole blood, and/or any collected red cell
product to be returned to the donor.
2
End procedure without fluid return. Ending the procedure
by touching the do not return fluid button prevents fluid return
to the donor.
3.
Cancel the end procedure command and resume into the
pause state. Touch the cancel button located in the lower right
corner of the screen to cancel the end procedure process
and to return to the Pause Screen. For information
regarding the Pause Procedure Screen, refer to the section
"Pausing the Procedure" provided earlier in this chapter.
C
S
O
OLLECTION
YSTEM
C
3 – O
HAPTER
PERATING CONSIDERATIONS
'
M
PERATOR
S
ANUAL
3-71
Advertisement
