Advertisement
A
C
C
LYX
OMPONENT
OLLECTION
C
4D– 2RBC S
HAPTER
Disconnecting
the Donor
Disconnect
Donor Prompt
4D-14
S
O
YSTEM
PERATOR
U
R
INGLE
NIT
ECOVERY
After the Yes button is touched, the disconnect donor prompt is
displayed and the instrument will automatically proceed to collect
the red cells from the in-process container.
Typical Remove Needle – Processing IP Container- 2RBC-
To disconnect the donor, follow these steps:
1.
Close the clamp on the donor line.
2.
Remove the pressure cuff from the donor's arm.
3.
Remove the needle while simultaneously sliding it into the
needle protector. Ensure the needle is completely covered
by the needle protector.
4.
Apply pressure to the venipuncture site to stop blood flow.
5.
Follow institutional guidelines for venipuncture site care and
release the donor according to applicable standard operating
procedures.
'
M
S
ANUAL
P
ROCEDURE
NLR (SUR)
07-19-01-518 – January 2009
Advertisement
