Multi-Step Speed Parameters - Delta C2000 Plus Series User Manual

04 Multi-step Speed Parameters

st
1 Step Speed Frequency
 04-00
nd
2 Step Speed Frequency

04-01
3 rd Step Speed Frequency

04-02
th
4 Step Speed Frequency

04-03
th
5 Step Speed Frequency
 04-04
th
6 Step Speed Frequency

04-05
7 th Step Speed Frequency

04-06
th
8 Step Speed Frequency

04-07
th
9 Step Speed Frequency
 04-08
th
10 Step Speed Frequency
 04-09
11 th Step Speed Frequency

04-10
th
12 Step Speed Frequency

04-11
th
13 Step Speed Frequency
 04-12
th
14 Step Speed Frequency
 04-13
15 th Step Speed Frequency

04-14
Settings
 Use the multi-function input terminals (refer to settings 1–4 of Pr.02-01–02-08 and Pr.02-26– 02-
31 Multi-function Input Command) to select the multi-step speed command (the maximum is
15 th step speed). Pr.04-00 to Pr.04-14 set the multi-step speed (frequency) as shown in the
following diagram.
 The external terminal / digital keypad / communication controls the RUN and STOP commands
with Pr.00-21.
 You can set each multi-step speed between 0.00–599.00 Hz during operation.
 Explanation for the timing diagram of the multi-step speed and external terminals
The related parameter settings are:
1. Pr.04-00–Pr.04-14: sets the 1
speed)
2. Pr.02-01–Pr.02-08 and Pr.02-26–Pr.02-31: sets the multi-function input terminals (multi-step
speed command 1–4)
 Related parameters:
 Pr.01-22 JOG Frequency
 Pr.02-01 Multi-function Input Command 1 (MI1)
 Pr.02-02 Multi-function Input Command 2 (MI2)
 Pr.02-03 Multi-function Input Command 3 (MI3)
Pr.02-04 Multi-function Input Command 4 (MI4)

0.00–599.00 Hz
st –15 th multi-step speed (to set the frequency of each step
12.1-04-1
Chapter 12 Descriptions of Parameter SettingsC2000 Plus
 You can set this parameter during operation.
Default: 0.00