Step 2: Create the event that will map the volume knob to the fader
In this example, the event maps the volume knob value to the fader of the "Amplifier" channel.
If there are user min and max fader limits set on the "Amplifier" channel, then those limits will be used
automatically with the map event.
Viewing the Gating Information Sent To A Control System Example
In this example, a logic output will be used to indicate that a particular microphone has gated on. When the
gate status changes, the logic output will change and the SoundStructure system will send a command
acknowledgment that could be used by a control system to indicate that a microphone has gated on.
Polycom, Inc.
265