— If the room provides Power Over Ethernet, connect the Ethernet cable directly to a LAN outlet as
shown in the following figure.
— If the room does not provide Power Over Ethernet, connect the Ethernet cable to the power supply
adapter. Then connect the power supply adapter to a LAN outlet and power outlet as shown in the
following figure.
The Polycom Touch Control device powers on and displays the language selection screen.
4 Choose the desired language and follow the on-screen instructions to pair the Polycom Touch
Control device with the SoundStructure system.
To Pair the Polycom Touch Control with the SoundStructure System
1 Select SoundStructure from the Connect to Device menu as shown in the following figure.
Polycom, Inc.
PoE
287