Rear Panel LAN Interface on SoundStructure Devices
LAN
C-LINK2
OBAM
IN
LAN
Dynamic IP Addresses
By default, the SoundStructure device accepts an IP address from a DHCP server. Once assigned, IP
addresses can be determined with the SoundStructure Studio software via the SoundStructure device dis-
covery method. To determine the IP address, connect to the device using the Search for Devices option
as shown in the following figure.
Searching Devices in SoundStructure Studio
SoundStructure Studio will display a list of systems found on the network interface specified by the Search
Network option. The SoundStructure systems that are found will be shown with their system name, IP
addresses, MAC addresses, and firmware version as shown in the following figure.
Polycom, Inc.
PIN 2: TXD
1
2
PIN 3: RXD
PIN 5: GROUND
PIN 7: CTS
PIN 8: RTS
REMOTE CONTROL 1
RS-232
1
2
REMOTE CONTROL 2
IR
OUT
12V
271