Polycom SoundStructure C16 Design Manual page 52

Hide thumbs Also See for SoundStructure C16:

Table of Contents

channel numbers of all the inputs and outputs are important because the physical channel numbers are

used to create virtual channels, as discussed in the next section.

Physical Channels Numbering when OBAM Linked

With the linking of devices as shown in the previous figure, the physical channels are ordered as expected

and shown in that figure and summarized in the following table.

Device A's inputs and outputs become the first sixteen physical inputs and sixteen outputs on the system,

device B's inputs and outputs become the next sixteen physical inputs and next sixteen physical outputs on

the system, and device C's inputs and output become the last sixteen physical inputs and sixteen physical

outputs on the system.

Local and System Input and Output Numbering for OBAM Linked SoundStructure Devices

Local Numbering (input

The system built from the top-to-bottom, OBAM out-to-OBAM-in linking results in a simple way of numbering

the physical input and output connections in a simple linear sequential fashion. Conceptually, the linking of

these devices should be viewed as creating one large system from the individual systems, as shown in the

next figure.

Polycom, Inc.

PIN 5: GROUND

REMOTE CONTROL 1

REMOTE CONTROL 2

PIN 5: GROUND

REMOTE CONTROL 1

REMOTE CONTROL 2

PIN 5: GROUND

REMOTE CONTROL 1

REMOTE CONTROL 2

System Numbering

(input and output)

Output Physical Channels 1 - 16

Input Physical Channels 1 - 16

Output Physical Channels 17 - 32

Input Physical Channels 17 - 32

Output Physical Channels 33 - 48

Input Physical Channels 33 - 48

SoundStructure C16

Troubleshooting