connected to physical output 2. If this wiring scheme does not match how the system has been wired, the
channels may be moved around on the wiring page to their desired locations.
Wiring Information
Controlling The System
A control system will typically be used to mute the microphone and adjust the volume settings in the local
room. The following sections describe how this may be done with the command syntax of the
SoundStructure devices. See Appendix A - Command Protocol Reference Guide for additional information
on the command set.
Using the Mute Controls
The microphones in the system may be muted either individually or as the "Mics" group by sending the
following API command to the SoundStructure device:
set mute "Mics" 1
will mute all the microphone in the system and
set mute "Mics" 0
will unmute the microphone in the system.
Polycom, Inc.
407