Polycom SoundStructure C16 Design Manual page 698

System Status—dev_status
Argument Argument value
Channel Type Device-Specific System
Value Type List
Read/Write Mode Read-Only
Values ok : Normal operation
warning : Warning condition
error : Error condition
Event Source No
Description
This parameter returns the status of the system. A value of ok indicates that the system is operating
normally. The front-panel LEDs on all the devices will be green in this condition. A value of warning indicates
that a warning condition has occurred. A warning condition is usually due to a configuration error that can
be corrected via software. The front-panel LEDs on all of the devices will be yellow in this condition. A value
of error indicated that an error has occurred that is most likely due to a hardware failure or some other
serious condition that can't be corrected via software. The front-panel LEDs on one or more of the linked
devices will be red in this condition.
Internal Temperature—dev_temp
Argument Argument value
Channel Type Device-Specific System
Value Type Floating-Point
Read/Write Mode Read-Only
Indices 1-3 : Temperature sensor index
System Limits Minimum: -40.0, Maximum: 125.0, Resolution: 0.1
Event Source No
Description
This parameter returns the temperature (in degrees C) from of one of the internal temperature sensors. The
temperature sensors have the following locations by index. 1 is at the back right, underneath the plug-in slot.
2 is near the center of the analog input circuitry. 3 is at the front right, in front of the power supply.
Polycom, Inc. 698