Polycom SoundStructure C16 Design Manual page 81

Hide thumbs Also See for SoundStructure C16:

Table of Contents

The following figure shows the default wiring for an example that the system created with six table top

microphones, stereo program audio, and a wireless microphone.

An Example SoundStructure Device with Default Wiring

If it is necessary to change the wiring from the default wiring, you can change the virtual wiring by clicking

and dragging signals from their current input or output to a new input or output, as shown in the following

figure. In this example, the Recording output changed from physical output 3 to physical output 6.

Polycom, Inc.

Troubleshooting