Managing SoundStructure Systems
This chapter describes the network and control aspects of SoundStructure systems including managing the
device over IP and configuring the RS-232 port.
Connecting To The Device
SoundStructure devices have a LAN interface and RS-232 port that may be used to configure, control, and
update the system software. This section describes both the LAN and RS-232 interfaces.
When multiple devices are linked over OBAM, only one Ethernet interface or RS-232 port is required to be
used, although any of the ports may be used.
LAN Interface
SoundStructure devices include a rear-panel LAN interface, shown in the following figure, that supports
10/100 Mbps communication with Auto-MDIX (medium dependent interface crossover) capability.
Auto-MDIX enables the use of either a standard CAT5e cable or cross-over cable to connect to an Ethernet
network. The SoundStructure device will detect either connection and work properly.
Polycom, Inc.
270